Display

 Backlit transreflective LCD (32 x 16 Pixels)

 (Good readability in low light and in direct sunlight)
 Indication of value and dimension (unit selectable) Rotatable reading position

 (mechanical block limits the total range (< 360°))

 2(0)...10 V, Max. current 10 mA

 LED

 Signal-LED (red)
 signals a message on the display, e.g. a switch alarm

 (when the flow rate falls below or exceeds a limit value) or an error message)

 Switch output

 2 short-circuit proof and reverse-polarity protected switch outputs

 Alarm: Low / Cable break: Low / OK: High

 Push-pull-outputs
 The outputs are self-configuring and can be connected as PNP or
 NPN switch.
 The switch contacts can be programmed as Min- or Max-contacts.

 Programming

 Programming by means of a programming ring (see operating instructions)
 Programmable features e.g.: hysteresis, span
 Programming protection by turning through 180° or

 by removing the programming ring